Turn Her Winter Pants into Summer Shorts in 5 Minutes

Hi!
I have a super quick and easy tutorial for all my mamas out there. I did this last year and I thought I’d share with you this easy method to change your little one’s winter pants into summer shorts, and the best part is it should only take about 5 minutes. Since the kiddos grow at alarming rates, there’s a good chance her leggings from the winter or spring won’t fit by the coming fall. Instead of packing them away, why not make them into shorts that are perfect for play time or under dresses or skirts. I did this last night with these adorable lemon print pants. It’s such a cute outfit, but once it hits 90 degrees F, I know we’re not going to be wearing pants much more for the rest of the summer. I thought these would work much better as shorts.

kids summer shorts tutorial

Let’s get started!

What you’ll need:
– Leggings you want to turn into shorts
– Pair of shorts for size reference
– The usual (scissors, ruler, thread, marking pencil, sewing machine)

First, lay out the leggings nice and flat, and then lay the shorts over them, just like this.

Use a ruler (or even eyeball it if you’re not picky) to measure about 1 inch past the shorts for the hem. Mark the line across the legs.

shorts sewing diy

shorts sewing diy

 

 

 

 

 

 

Take your scissors and cut across the line.

shorts sewing diy

Now turn the leggings inside out, and fold up the hem, making sure it’s even all around. It really doesn’t matter how much you fold it over, but I’d say about 1/2 inch. You can pin or even iron this if you’d like, but I found that it wasn’t really worth it.
Slide the short leg over your machine (you’ll need to take the storage compartment thing off….I’m sure there’s a technical name for this). Switch your machine to the zig zag stitch.

shorts sewing diy

kids summer shorts tutorial

I like to start stitching at or near the seam. Make sure you reverse stitch, and then continue forward all the way around the leg. You will want to make sure your zig zag stitch overlaps the edge just a little bit to keep the fabric down. When you get all the way around, go past where you started and then reverse again.

kids summer shorts tutorial

Repeat on the other leg. Check to make sure the hem matches the side you just did.

And that’s it! Turn the shorts over and iron. Trim your threads! Now, go ahead and cut through all those leggings, and you’ve got your little one plenty of shorts for summer.

kids summer shorts tutorial

How adorable these shoes by Carter’s would look with this outfit.

 

I don’t sell leggings, but you can check out my cute baby accessories here: SHOP

SaveSaveSaveSave

SaveSave

SaveSave

Related Posts

Easy Plastic Bag Holder Sewing Project

Hi everyone! I’m back after taking a long break to move and get settled. One of the things I wanted to get a handle on right away at the new place was those reproducing (I swear the reproduce) plastic bags! I actually prefer using reusable bags but seeing as they were packed away in an unknown box up until recently, I managed to accrue quite a few of those plastic bags. Not to mention, there are always those times you’re out and you forget the reusable bags at home (hint – best place to leave them is in the car). I still manage to forget them sometimes! I decided to make myself a plastic bag holder.

 

Anyway, here’s a super quick and easy beginner sewing project for a plastic bag holder that will help you keep all of those plastic bags organized.

You will need:
– The usual (scissors, ruler, pins, thread, sewing machine)
– A fat quarter (will be using 22×18 inches) of a heavyweight cotton such as a canvas print from the decorator fabric section.
– An 8-inch piece of 1″ twill tape, or rope, or any sort of strong trim you can use to hang the finished holder.
– An 8-inch piece of elastic at least 1/2″ wide and probably no wider than 1″
– That’s all you need!

Fabric.com is my favorite place to order fabric from! They have almost anything you could ever be looking for!! Check them out by clicking the image below.

This post contains affiliate links, which means I will make a small commission.



The first step will be to cut your fabric. It will be 18 inches across and 22 inches long. I really need to get a cutting mat, but for this I used a long ruler, a marking pencil, and scissors. If it’s not exactly perfect, it won’t make much of a difference for this project.

Once it’s cut, we will iron down from the top (one of the 18″ sides) about 1/2 inch, and then fold over itself another 1/2 inch to make a nice edge.

 

 

 

 

 

 

Also fold over the bottom, but this time make sure the amount is enough that your elastic will fit through, as well as room for the seam allowance. So My elastic was 3/4″, so I folded over about 1″ and then again, folded that over itself an inch. Then ironed it nice and crisp.

 

 

 

 

 

Next, we’ll stitch along the folds to hold them in place. I usually use a small seam allowance about 3/8th, 1/2″ also works. Be mindful when stitching the bottom that your elastic will still fit through the “pocket” after stitching.

 

 

 

 

 

After that, we will pin a safety pin to one end of the elastic so we can pull it through the pocket we made at the bottom of the fabric. Pull the elastic through until the end reaches the end of the pocket. Carefully stitch this down with a few straight stitches back and forth, as well as a zigzag stitch for extra security.

 

 

 

 

 

 

Continue to pull the elastic through to the other end as it starts to bunch up. When you reach the other end, stitch this end down the same way as before.

You’re almost done! Now we will fold the fabric in half with right sides facing in, and pin the edges so it can be stitched up. Then you will stitch up the side, making sure to do about an inch reverse stitch at the beginning and end. For this project, I used a straight stitch, but if you have a serger you can also use that. If you are doing a straight stitch, use pinking shears to trim the seam to help avoid fraying. If you don’t have those, you can do a zig zag stitch near the edge to help.

Now you will take your twill tape, ribbon, rope, or any other strong trimming piece, and fold over it in half, pin it to the top, and stitch it down. I used a straight stitch in two places for extra strength.

You’re finished! See, I told you that was quick. Turn your bag holder right side in, and hang on the wall. You’re ready to fill it with plastic bags 🙂

 

If you were looking to buy one, I’m hoping to have these available soon, but in the meantime, please check out my store with adorable baby and toddler items here -> SHOP

Have you thought about opening an Etsy shop of your own? Be sure to read my advice here before you do, and sign up for the newsletter for more information about this!

If you like this, you will love my tutorial for my car trash bag! It helps me keep my car clean!! See it here!

This post contains affiliate links. Thank you for your support, I really appreciate it! 🙂

SaveSave

Related Posts